Undersink Filter Kit (without tap)
Description
- Chemicals such as Chlorine
- Fine particles such as sand and rust
Overview
The BRITA Under Sink Filter Kit is an easy solution to have filtered water on demand from your tap! The installation ready kit includes a A1000 filter cartridge, filter head, mounting bracket, flexible hoses, a pressure limiting and isolating valve set, and a cartridge status indicator. The cartridge status indicator will remind you when the filter is due to be replaced.
BRITA filtration effectively reduces chemicals such as Chlorine and sediments such as sand and rust.
For optimum filtration results, we recommend replacing the filter every 6 months.
30 Day Money Back Guarantee
We offer 30 Day Money Back Guarantee on all of our products, so if you are not completely satisfied, simply return within 30 days and we’ll give your money back.
Overview
The BRITA Under Sink Filter Kit is an easy solution to have filtered water on demand from your tap! The installation ready kit includes a A1000 filter cartridge, filter head, mounting bracket, flexible hoses, a pressure limiting and isolating valve set, and a cartridge status indicator. The cartridge status indicator will remind you when the filter is due to be replaced.
BRITA filtration effectively reduces chemicals such as Chlorine and sediments such as sand and rust.
For optimum filtration results, we recommend replacing the filter every 6 months.
30 Day Money Back Guarantee
We offer 30 Day Money Back Guarantee on all of our products, so if you are not completely satisfied, simply return within 30 days and we’ll give your money back.
Specification
| Weight | 2.2 kg |
| Dimensions | 13.2 (w) x 15.8 (d) x 32 (h) cm |
Specification
| Weight | 2.2 kg |
| Dimensions | 13.2 (w) x 15.8 (d) x 32 (h) cm |
FAQ
What is the best way to store BRITA filtered water?
You should ideally store your jug with BRITA filtered water in a cool place, e.g. in the fridge. You should also avoid direct sunlight and use the water within one to two days.
How do I know when to exchange the filter cartridge?
The LED Cartridge Status Indicator integrated in the lever of the BRITA Tap shows your individual cartridge status based on local water hardness and individual water consumption. Each time filtered water is dispensed, it will light up either green, yellow or red.
Green light: Filter cartridge is working at optimum performance
Yellow light: Filter Cartridge capacity at 10%, get replacement soon
Red light: Filter cartridge needs to be replaced.
How long will the cartridge last?
The cartridge lasts approximately up to six months. The exact time depends on your water consumption.
Can I exchange the cartridge myself?
Yes. It's very easy and can be done within minutes in just four steps:
1. Unlock cartridge using two blue levers on side of cartridge head. No need to turn off your mains water, because there is an automatic shut off valve within the cartridge head.
2. Release pressure using the flush valve. After pressure release, close valve again.
3. Pull old cartridge out and replace with a new one.
4. Lock the cartridge in place. You are good to go!
Watch Cartridge Exchange Video
FAQ
What is the best way to store BRITA filtered water?
You should ideally store your jug with BRITA filtered water in a cool place, e.g. in the fridge. You should also avoid direct sunlight and use the water within one to two days.
How do I know when to exchange the filter cartridge?
The LED Cartridge Status Indicator integrated in the lever of the BRITA Tap shows your individual cartridge status based on local water hardness and individual water consumption. Each time filtered water is dispensed, it will light up either green, yellow or red.
Green light: Filter cartridge is working at optimum performance
Yellow light: Filter Cartridge capacity at 10%, get replacement soon
Red light: Filter cartridge needs to be replaced.
How long will the cartridge last?
The cartridge lasts approximately up to six months. The exact time depends on your water consumption.
Can I exchange the cartridge myself?
Yes. It's very easy and can be done within minutes in just four steps:
1. Unlock cartridge using two blue levers on side of cartridge head. No need to turn off your mains water, because there is an automatic shut off valve within the cartridge head.
2. Release pressure using the flush valve. After pressure release, close valve again.
3. Pull old cartridge out and replace with a new one.
4. Lock the cartridge in place. You are good to go!
Watch Cartridge Exchange Video
Reviews
Reviews
- Overview
- Specification
- FAQ
- Reviews
You may also like
